Honeywell HPM Power Supply, P/N - 51198947-100

Although the OEM says these power supplies have reached their End of Life (EOL), we know that users still rely on these products. That's why we have made it a point to make sure these these can be supported for many years to come. We do a complete rebuild of the unit and provide oscilloscope pictures for our customer.

The power supply is the heart of the xPM power system and the recommendation is for a redundant power supply configuration having each power supply fed by its own dedicated power source. Honeywell has introduced the next generation power supply for this family which increases the robustness of the power system.

Even with redundant power supplies, one must be careful when changing out a failed power supply. This is to minimize disturbance of the environment and to reduce the introduction of particles into the area around and near the power supplies. Those particles can be pulled through the airflow of the working power supply and result in the second power supply failing.

For this reason, Honeywell does not recommend replacing a working power supply on-process (other than the black-colored version). However, power supplies do not last forever and you should consider upgrading older power supplies, or prepare to do so, when the opportunities arise.

The recommendation for changing out the power supplies is every ten years and this replacement should be included during a scheduled down time if possible. The power supply replacement procedure listed in the Honeywell xPM Service manual should be followed at all times.

We're here to help! Please email us at [email protected] or call us at 1-800-546-1113.