Submit search
The Profibus DP card uses the Profibus DP terminal block to provide terminations for wiring.Please call for pricing and availability.
The 32-channel terminal block is recommended to provide screw terminations for field wiring for the Sequence of Events card. Please call for pricing and availability.
The DeltaV system supports the DeviceNet card and Series 2 DeviceNet card in Simplex mode.Please call for pricing and availability.
The DeltaV system supports the DI, 8-Channel, 24 VDC, Dry Contact card.Please call for pricing and availability.
The DeltaV system supports the DO, 8-Channel, 24 VDC, High-Side card.Please call for pricing and availability.
The DeltaV system supports the DI, 32-Channel, 24 VDC, Dry Contact card.Please call for pricing and availability.
The DeltaV system supports the DO, 32-Channel, 24 VDC, High Side card.Please call for pricing and availability.
The DeltaV system supports the Series 2 AI, 16-Channel, 4-20 mA, HART card in Simplex mode.Please call for pricing and availability.
The DeltaV system supports the Series 2 Isolated Input card.Please call for pricing and availability.
The Isolated Input card uses the Isolated Input terminal block to provide terminations for wiring.Please call for pricing and availability.
The DeltaV system supports the Serial Card, 2 Ports, RS232/RS485 and the Series 2 Serial Card, 2 Ports, RS232/RS485.Please call for pricing and availability.
Fieldbus is an all digital, serial, bi-directional communication protocol that interconnects devices such as actuators, sensors, discrete devices, and controllers in the field.Please call for pricing and availability.
The DeltaV system supports the Profibus DP and Series 2 Profibus DP card in Simplex mode.Please call for pricing and availability.
The 16-pin mass termination block provides 1:1 signal transmission of eight signals to the external passive input/output modules.Please call for pricing and availability.
The 24-pin mass termination block can be used with 4-wire Analog Input 4-20 mA and 1-5 VDC applications…Please call for pricing and availability.
The Thermocouple, mV card uses the Thermocouple, mV terminal block to provide terminations for wiring.Please call for pricing and availability.
The RTD, ohms card uses the RTD, ohms terminal block to provide terminations for wiring.Please call for pricing and availability.
The DeltaV system supports left and right carrier extenders and dual, one-wide carrier extenders.Please call for pricing and availability.
The fieldbus H1 carrier provides an H1 interface to an 8-channel discrete input card, an 8-channel discrete output card, and terminal blocks.Please call for pricing and availability.
A rotary keying system ensures compatibility between I/O cards and terminal blocks after installation is complete.Please call for pricing and availability.
The Series 2 AO, 8-Channel, 4-20 mA, HART Card has a LocalBus power rating of 12 VDC at 150 mA with a bussed field power rating of 24 VDC at 300 mA.Please call for pricing and availability.
The Redundant Analog Output Terminal Block has a voltage rating of 30 VDC with a maximum current of 200 mA.Please call for pricing and availability.
The Series 2 AI, 8-Channel, 4-20 mA, HART Card has a LocalBus power rating of 12 VDC at 150 mA with a bussed field power rating of 24 VDC at 300 mA.Please call for pricing and availability.
The Redundant Analog Input Terminal Block has a voltage rating of 30 VDC with a maximum current of 200 mA.Please call for pricing and availability.
The 16-Channel Terminal Block has a voltage rating of 30VDC with a maximum current of 100 mA.Please call for pricing and availability.